Customizable & high-quality stainless steel control cabinet equipment housing | Youlian

1. Equipment shells are usually made of carbon steel, cold-rolled plates, stainless steel, alloy steel, etc.

2. The thickness of the cabinet frame of the equipment shell is 1.5mm, the thickness of the cabinet door is 2.0mm, the thickness of the mounting plate is 2.5mm, and the thickness of the bottom plate is 2.5mm and 1.5mm

3. The equipment shell has a solid structure and is easy to disassemble and assemble.

4. Equipment shell surface treatment process: the surface undergoes ten processes of oil removal, rust removal, surface conditioning, phosphating, cleaning and passivation, and finally high-temperature spraying

5.IP55-65 protection

6. Dust-proof, rust-proof, waterproof, anti-corrosion, etc.

7. Application areas: The control cabinet is an electrical equipment with a wide range of uses and diverse functions. It can realize automatic control, remote control and monitoring of electrical equipment in various fields, and can quickly locate and eliminate faults. For example, industrial automation, smart buildings, transportation, electric power transportation, etc.

8. Equipped with door locks to increase safety factor and prevent accidents.

9.Packaging according to your requirements

10. The surface of the box should be clean and free of scratches. The connections between the box frame, side panels, top cover, rear wall, door, etc. should be tight and neat, and there should be no burrs on the openings and edges.

11. Accept OEM and ODM

Send email to us

Product Detail

Product Tags

Equipment housing Product pictures

1. Equipment shells are usually made of carbon steel, cold-rolled plates, stainless steel, alloy steel, etc.

2. The thickness of the cabinet frame of the equipment shell is 1.5mm, the thickness of the cabinet door is 2.0mm, the thickness of the mounting plate is 2.5mm, and the thickness of the bottom plate is 2.5mm and 1.5mm

3. The equipment shell has a solid structure and is easy to disassemble and assemble.

4. Equipment shell surface treatment process: the surface undergoes ten processes of oil removal, rust removal, surface conditioning, phosphating, cleaning and passivation, and finally high-temperature spraying

5.IP55-65 protection

6. Dust-proof, rust-proof, waterproof, anti-corrosion, etc.

7. Application areas: The control cabinet is an electrical equipment with a wide range of uses and diverse functions. It can realize automatic control, remote control and monitoring of electrical equipment in various fields, and can quickly locate and eliminate faults. For example, industrial automation, smart buildings, transportation, electric power transportation, etc.

8. Equipped with door locks to increase safety factor and prevent accidents.

9.Packaging according to your requirements

10. The surface of the box should be clean and free of scratches. The connections between the box frame, side panels, top cover, rear wall, door, etc. should be tight and neat, and there should be no burrs on the openings and edges.

11. Accept OEM and ODM

Equipment housing Product parameters

Product name：	Customizable & high-quality stainless steel control cabinet equipment housing \| Youlian
Model Number:	YL1000076
Material：	Cold rolled steel plate, galvanized plate or customized
Thickness：	1.5mm，2.0mm，2.5mm
Size：	6005001750MM OR Customized
MOQ:	100PCS
Color:	Cabinet color: RAL7032/7035 Base color: RAL7022/RAL9005 Mounting plate color: RAL2000 or galvanized, you can also customize the color you need.
OEM/ODM	Welocme
Surface Treatment:	High temperature spraying
Protection level：	IP55-IP65
Process:	Laser cutting,CNC bending, Welding,Powder coating
Product Type	Equipment housing

Equipment housing Product Features

1. The equipment shell is made of cold-rolled steel plate & galvanized plate.
2. The mounting plate inside the box can be adjusted front and back in 25mm increments. Mounting rails are also available inside the cabinet for quick assembly. The top cover and bottom plate are fixed with screw fasteners for easy disassembly and assembly, making the installation of workpieces in the cabinet easier and more convenient.
3.Have ISO9001/ISO14001/45001 certification
4. Front and rear doors are convenient for maintenance, repair, etc.
5. High temperature spraying, anti-rust, dust-proof, waterproof, anti-corrosion, etc.
6. There are grounding bolts on the cabinet door, the load-bearing hinge is easy to install, and it is also convenient to replace the cabinet door. The cabinet door can be opened 130°. Plastic slide rails can be used to push the mounting plate into the cabinet from the front of the cabinet through the guide rails; the sturdy rectangular frame not only strengthens the front door, but can also be used to fix and install electrical components (used in conjunction with the door mounting horizontal strips).
7. Protection level: IP66/IP65, etc.
8. Install multiple fans for fast heat dissipation
9. The rear panel can be easily installed and fixed with screws; the cabinet door can also be replaced. Equipped with MS821 lock as standard, the cabinet door can be locked at three points: upper, middle and lower.
10. A waterproof edge is added to the cabinet door frame and cooperates with the cabinet door sealing ring to prevent water and dust from falling into the cabinet. (Single door) The left and right openings are interchangeable and easy to use.
11. With casters on the bottom, easy to move
12. Use a soft brush or hair dryer to remove dust from the panel plug-in and all electromagnetic switches, and check the status and contact conditions of the electrical switch contacts in the control cabinet, the insulation condition of the coil surface and whether there is any looseness. Mechanical components operate reliably.

Equipment housing Product structure

Equipment enclosure cabinet: This part is made of sheet metal materials, usually cold-rolled steel plates or stainless steel plates. The size and shape of the control cabinet box can be designed according to specific needs. It usually has an open front panel and a sealed rear panel.

Front panel: The front panel is located on the front of the control cabinet and is usually made of cold-rolled steel plate. The front panel is equipped with control and indication equipment, such as buttons, switches, indicator lights, digital display instruments, etc., which are used to monitor and control the equipment in the control cabinet.

Side panels: There are side panels on both sides of the control cabinet, which are usually also made of cold-rolled steel plates. The side panels play a role in strengthening the stability of the control cabinet and protecting the internal equipment. There are usually heat dissipation holes and wiring holes on the side panels for heat dissipation and cable management.

Rear panel: The rear panel is located on the back of the control cabinet and is usually made of cold-rolled steel plate. It provides a sealed back to prevent dust, moisture and other external substances from entering the control cabinet.

Top and bottom plates: The top and bottom plates are located at the upper and lower parts of the control cabinet and are usually also made of cold-rolled steel plates. They are used to reinforce the control cabinet structure and prevent dust from entering.

The sheet metal structure of the control cabinet may also include partitions, mounting plates, guide rails, ground rods and other components, which are used to separate equipment, install electrical components, and provide grounding and other functions.

These structural components are assembled together by welding, bolting or screws to form a complete control cabinet. The final structural design is adjusted and optimized based on specific application requirements, equipment type, specifications and other factors.

Equipment housing Production process

Factory strength

Dongguan Youlian Display Technology Co., Ltd. is a factory covering an area of more than 30,000 square meters, with a production scale of 8,000 sets/month. We have more than 100 professional and technical personnel who can provide design drawings and accept ODM/OEM customization services. The production time for samples is 7 days, and for bulk goods it takes 35 days, depending on the order quantity. We have a strict quality management system and strictly control every production link. Our factory is located at No. 15 Chitian East Road, Baishigang Village, Changping Town, Dongguan City, Guangdong Province, China.

Mechanical Equipment

Certificate

We are proud to have achieved ISO9001/14001/45001 international quality and environmental management and occupational health and safety system certification. Our company has been recognized as a national quality service credence AAA enterprise and has been awarded the title of trustworthy enterprise, quality and integrity enterprise, and more.

Transaction details

We offer various trade terms to accommodate different customer requirements. These include EXW (Ex Works), FOB (Free On Board), CFR (Cost and Freight), and CIF (Cost, Insurance, and Freight). Our preferred payment method is a 40% downpayment, with the balance paid before shipment. Please note that if an order amount is less than $10,000 (EXW price, excluding shipping fee), the bank charges must be covered by your company. Our packaging consists of plastic bags with pearl-cotton protection, packed in cartons and sealed with adhesive tape. Delivery time for samples is approximately 7 days, while bulk orders may take up to 35 days, depending on the quantity. Our designated port is ShenZhen. For customization, we offer silk screen printing for your logo. Settlement currency can be either USD or CNY.

Customer distribution map

Mainly distributed in European and American countries, such as the United States, Germany, Canada, France, the United Kingdom, Chile and other countries have our customer groups.